LED PANEL FLEX
At Bamby Stone, we use only high-quality LED panels for our projects. These flexible panels are designed to serve you for up to 20 years. Our panels can support weights of up to 2 tons, and you can switch them to any color using your app or remote controller. Six panels cover one square meter.
$99.00
14 in stock
PANEL FLEX 5050RGBWW 288LEDs/M 50W/ PCS
At Bamby Stone, we use only high-quality LED panels for our projects. These flexible panels are designed to serve you for up to 20 years. Our panels can support weights of up to 2 tons, and you can switch them to any color using your app or remote controller. Six panels cover one square meter.
Panel Sizes
Length |
Width |
Height |
|
480mm/18.912in |
240mm/9.4488in |
1.77mm/0.069in |
Product Features
- Suitable for advertisements, counter and bar tops, curved surfaces, low clearance applications and situations where exact measurements are not known or likely to change.
- With high output SMD5050 RGBWW 5 in 1 chip, panel flex are specifically engineered to be dimmable, field customizable solution and around curvilinear shapes.
- Easily and quickly without soldering. It allows non-site customization which can eliminate custom order lead times.
Absolute Maximum Ratings
Thermal Measurement Point |
Tc |
80°C/176°F |
Operating Temperature |
Topr |
<80°C/<176°F |
Storage Temperature |
Ts |
-20~+60°C/-68~140°F |
Number of FPC Connection |
Note
1) Heat dissipation:
The closed space needs to add holes on the side to ensure that the internal temperature is radiated outwards:If it is installed on the wall, holes should be punched around the sides to allow the internal air to circulate with the outside air, increase heat dissipation and reduce temperature.If with more quantity, it is also necessary to increase the fan to form an inhalation and exhalation.
2) Connection Wiring:
-- Max to 30 pcs connections, 5pcs (vertical) * 6pcs (horizontal), using 18AWG wire.
-- Terminal connectors are only suitable for 2-3 pcs of connection, because the carrying current is not enough, otherwise the connector will burn and the wires will melt.
3) Distance:
Eg:
When using a panel flex with lens to install, if the distance between the backlight source and the billboard is 5cm, the distance between the two panels is within 2cm;While with the lensless panel flex to install, as close as possible between the two panels.
Additional information
Weight | 0.5 kg |
---|---|
Dimensions | 480 × 250 × 15 mm |